Aruba 24G POE+ 4SFP+ 1-Slot Ethernet Switch

The HPE FlexNetwork 5140 HI Switch series delivers high availability and scalability at the access layer of medium and large enterprise campus networks.

These switches offer high speed connectivity and flexibility with 10GbE uplinks, and combo ports. Support for add-on modules increases capacity or provides additional features. It is a highly cost-effective switch with abundant features such as DRNI and IRF for improved resiliency, QoS features for better reliability, iNQA for real time network health performance and capacity visibility, hardware based MACsec for end-to-end encrypted security and dual redundant power supplies with Energy Efficient Ethernet for improved power saving.

This Switch Series also includes Smart MC at no additional cost and combined with Intelligent Management Center (IMC), provides embedded network management, enhanced network visibility and automation.

FEATURES AND BENEFITS | Highly Resilient and Scalable Access Layer Switches

• The HPE FlexNetwork 5140 HI Switch series uses Intelligent Resilient Framework (IRF) to support virtualization of up to nine physical switches into one logical device for simpler, flatter, more agile and resilient networks.
• Supports 10GbE uplinks, static and RIP routing, PoE+, ACLs, IPv6 for improved and cost-effective network performance.
• DRNI, enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also provides access to the aggregate bandwidth and simplifies network topology by virtualizing two physical devices into a logical device.
• iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss and byte loss rate.
• Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch delivering up to 1440 Watts of PoE+ for powered cameras, phones, and wireless Access Points.

Robust Quality of Service (QoS)

• The HPE FlexNetwork 5140 HI Switch series supports advanced classifier based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or the entire switch.
• Provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR) and SP+WRR.
• Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic and preserve more bandwidth for critical data.

Product Specifications:

• Product Type: Ethernet Switch
• Power Source: Power Supply
• Layer Supported: 2
• Form Factor: Cabinet Mount
• Form Factor: Rack-mountable
• Power Consumption: 928 W
• Brand Name: HPE
• Expansion Slot Type: SFP+
• Manageable: Yes
• Ethernet Technology: 10 Gigabit Ethernet
• Ethernet Technology: Gigabit Ethernet
• Product Family: FlexNetwork 5140 HI
• Media Type Supported: Twisted Pair
• Media Type Supported: Optical Fiber
• Total Number of Network Ports: 24
• PoE (RJ-45) Port: Yes
• Product Type: Ethernet Switch
• Manufacturer Part Number: R9L63A
• Manufacturer Website Address: http://www.hpe.com
• Manufacturer: Hewlett Packard Enterprise
• Product Name: FlexNetwork 5140 24G PoE+ 4SFP+ HI Switch
• Product Line: FlexNetwork
• Product Series: 5140 HI
• Brand Name: HPE
• The HPE FlexNetwork 5140 HI Switch series uses Intelligent Resilient Framework (IRF) to support virtualization of up to nine physical switches into one logical device for simpler, flatter, more agile and resilient networks.
• Supports 10GbE uplinks, static and RIP routing, PoE+, ACLs, IPv6 for improved and cost-effective network performance.
• DRNI, enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also provides access to the aggregate bandwidth and simplifies network topology by virtualizing two physical devices into a logical device.
• iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss and byte loss rate.
• Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch delivering up to 1440 Watts of PoE+ for powered cameras, phones, and wireless Access Points.

Robust Quality of Service (QoS)

• The HPE FlexNetwork 5140 HI Switch series supports advanced classifier based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or the entire switch.
• Provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR) and SP+WRR.
• Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic and preserve more bandwidth for critical data.

Expansion Slot Type: SFP+

Number of SFP+ Slots: 4

Network (RJ-45): Yes

Modular: Yes

Total Number of Network Ports: 24

Port/Expansion Slot Details: 1 x Expansion Slot

Port/Expansion Slot Details: 24 x Gigabit Ethernet PoE+

Port/Expansion Slot Details: 4 x 10 Gigabit Ethernet Expansion Slot

Manageable: Yes

Network Technology: 10GBase-X

Network Technology: 10/100/1000Base-T

Ethernet Technology: 10 Gigabit Ethernet

Ethernet Technology: Gigabit Ethernet

Media Type Supported: Optical Fiber

Media Type Supported: Twisted Pair

Environmentally Friendly: Yes

Layer Supported: 2

Networking Standards: IEEE 802.1p

Networking Standards: IEEE 802.1Q

Networking Standards: IEEE 802.1s

Networking Standards: IEEE 802.1v

Networking Standards: IEEE 802.1ad

Networking Standards: IEEE 802.1ae

Networking Standards: IEEE 802.1w

Networking Standards: IEEE 802.1x

Networking Standards: IEEE 802.3

Networking Standards: IEEE 802.3ab

Networking Standards: IEEE 802.3ad

Networking Standards: IEEE 802.3ae

Networking Standards: IEEE 802.3af

Networking Standards: IEEE 802.3at

Networking Standards: IEEE 802.3az

Networking Standards: IEEE 802.3i

Networking Standards: IEEE 802.3u

Networking Standards: IEEE 802.3x

Networking Standards: IEEE 802.3z

Networking Standards: IEEE 802.1ak

Networking Standards: IEEE 802.1AX

Networking Standards: IEEE 802.1D

Weight (Approximate): 9.20 kg

Form Factor: Cabinet Mount

Form Factor: Rack-mountable

Height: 43.4 mm

Width: 439.9 mm

Depth: 460 mm

Compatible Rack Unit: 1U

Input Voltage: 48 V DC

Input Voltage: 230 V AC

Input Voltage: 120 V AC

Input Voltage: 60 V DC

Power Source: Power Supply

Frequency: 60 Hz

Frequency: 50 Hz

Power Consumption: 928 W

Number of Power Supplies Supported: 2

PoE (RJ-45) Port: Yes

PoE Budget: 720 W